Schedules

Firewall configuration

 

 

If you create a recurring schedule with a stop time that occurs before the start time, the schedule starts at the start time and finishes at the stop time on the next day. You can use this technique to create recurring schedules that run from one day to the next. You can also create a recurring schedule that runs for 24 hours by setting the start and stop times to the same time.

To create a recurring schedule

1Go to Firewall > Schedule > Recurring.

2Select New to create a new schedule.

3Type a Name for the schedule.

The name can contain numbers (0-9), uppercase and lowercase letters (A-Z, a-z), and the special characters - and _. Other special characters and spaces are not allowed.

4Select the days of the week that you want the schedule to be active on.

5Set the Start and Stop hours in between which you want the schedule to be active. Recurring schedules use a 24-hour clock.

6Select OK to save the recurring schedule.

Figure 11: Adding a recurring schedule

Adding schedules to policies

After you create schedules, you can add them to policies to schedule when the policies are active. You can add the new schedules to policies when you create the policy, or you can edit existing policies and add a new schedule to them.

156

Fortinet Inc.

Page 156
Image 156
Fortinet 50A user manual Adding schedules to policies, 156