Remove the front cover, if installed. Remove the handles, if installed.
Mounting your server into a cabinet
6 To lock the front cover, insert the key into the lock and rotate it ¼ turn clockwise. To unlock it, rotate the key ¼ turn
Lock
Unlock
Removing the server from a cabinet
To remove the server from a cabinet:
Warning
Screws are required to support the front of the server. You must support the server while removing the front screws and while sliding the server off the cabinet rails.
1
2
3 While supporting the front of the server, remove the four screws that secure the server rails to the front cabinet posts.
4 While supporting the server, slide the server away from the cabinet until it slides off the cabinet rails.
| www.gateway.com | 19 |
|
