Follow the instructions in “Closing the server case” on page 48.
Chapter 4: Installing Components
6 Locate the old battery on the system board and note its orientation. You will need to install the new battery the same way.
CMOS battery
7 Push the battery retention clip away from the battery until the battery lifts up, then remove the old battery. You can use a screwdriver to help lift the battery.
8 Make sure that the positive (+) side of the new battery is facing up, then press the new battery into the socket until it snaps into place.
9
10 Turn on your server, then press F2 when the Gateway logo screen appears during startup.
11
12
Restore any BIOS settings that you wrote down in Step 3.
Save all your settings and close the BIOS Setup utility.
78 | www.gateway.com |
