Record the BIOS settings on your printout, then close the utility.
Print the appendix for BIOS Settings in this guide.
Replacing the CMOS battery
Replacing the CMOS battery
If the server clock does not keep time or the settings in the BIOS Setup utility are not saved when you turn off the server, replace the CMOS battery with an equivalent battery.
Warning
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of or recycle used batteries by taking them to a hazardous waste facility. Follow all local regulations for proper battery disposal.
To replace the battery:
1
2 Open the BIOS Setup utility. For instructions, see “Opening the BIOS Setup utility” on page 90.
3
4 Turn off your server, then follow the instructions in “Preventing static electricity discharge” on page 45.
5 Follow the instructions in “Opening the server case” on page 46.
www.gateway.com | 77 |
