Gateway 955 manual Installing PCI expansion cards

Installing PCI expansion cards

4 Locate the appropriate riser card, then lift the riser card from the system board by lifting the blue plastic loop and the end of the riser card closest to the front of the server.

5 Pull the card locking clip open, then swing the locking clip away from the riser card.

6 If you are replacing a card, remove the old expansion card. You can slightly seesaw the card end-to-end to loosen the card, but do not bend the card sideways.

Warning

Do not touch the contacts on the bottom part of the expansion card. Touching the contacts can cause electrostatic damage to the card.

www.gateway.com 61