Installing a processor
Installing a processor
The server is compatible with Intel® Xeon processors. The server automatically detects the processors each time you turn on the server. Whenever you install new processors, you should first install the most current version of the BIOS. For instructions, see “Updating the BIOS” on page 91.
Important
Warning
Warning
You must have a processor in the Processor 1 socket, or your server will not start.
If you are upgrading your server from one processor to two, you may need to reconfigure your operating system so it can recognize the additional processor. For more information, see your operating system’s documentation.
A heat sink must be installed on the processor. Installing a processor without a heat sink could damage the processor.
Processors and heat sinks may be hot if the computer has been running. Before replacing a processor or heat sink, allow them to cool for several minutes.
To replace a processor:
1 Install the most current BIOS version. For instructions, see “Updating the BIOS” on page 91.
2 Follow the instructions in “Preventing static electricity discharge” on page 45.
3 Follow the instructions in “Opening the server case” on page 46.
www.gateway.com | 67 |
