Gateway 955 manual Installing memory, Installing Components

Chapter 4: Installing Components

Installing memory

Modules must be installed in identical pairs. Use only low-profile (LP) 1.2-inch, DDR-266 compliant, SDRAM registered ECC, DIMM memory modules. First install modules into Bank 1, then Bank 2, then Bank 3. Supports up to 12 GB total memory.

Caution

Modules must be installed in identical pairs. Use only low-profile (LP) 1.2-inch, DDR-266 compliant, SDRAM registered ECC, DIMM memory modules.

Install memory first into Bank 1, Bank 2, then Bank 3. If memory is installed incorrectly, your server will not start.

Bank 1

Bank 2

Bank 3

58 www.gateway.com