Follow the instructions in “Opening the server case” on page 46.
Chapter 4: Installing Components
Replacing the system board
To replace the system board:
1 Follow the instructions in “Preventing static electricity discharge” on page 45.
2
3 Remove the memory modules. For instructions, see “Installing memory” on page 58.
4 Remove the riser cards. For instructions, see “Installing PCI expansion cards” on page 60.
5 Remove the fan module. For instructions, see “Replacing the fan module” on page 64.
6 Remove the heat sinks and processors. For instructions, see “Installing a processor” on page 67.
7 Disconnect all cables from the system board, noting their locations and orientation. (You will reconnect the cables after you install the new board.)
84 | www.gateway.com |
