If your printer is connected to a network

1.Open the printer's embedded Web server (EWS).

2.Click the Bluetooth tab.

3.Configure the settings you want, and then click Apply.

The following table describes the Bluetooth settings:

Option

Device Address

Device Name

Passkey/PIN

Reset Bluetooth

Visibility

Security Level

Description

The MAC address of your Bluetooth wireless printer adapter.

Note You cannot change this address.

The device name assigned to the printer so that other Bluetooth devices can identify it.

The 4-digit number you must enter before you can print using Bluetooth. The default passkey is 0000.

To change the Passkey

HP Printer Utility: Click Change PIN Code, and then enter a new 4-digit number.

EWS: Enter a new 4-digit number.

To reset Bluetooth to factory default settings

HP Printer Utility: Click Reset Device Access.

EWS: Click Yes, reset Bluetooth.

To select the printer's visibility to other Bluetooth devices

HP Printer Utility: Select one of the following options:

Private Mode: Only sending devices that have stored the printer's Bluetooth device address can discover and use the printer.

Public Mode: Any Bluetooth device within range can discover and use the printer.

EWS: Select one of the following options:

Visible to All: Any Bluetooth device within range can print to the printer.

Not Visible: Only Bluetooth devices that have stored the device address of the printer can print to it.

To set the level of security

HP Printer Utility: Select the Encryption Required check box to require a passkey from a Bluetooth device within

User's guide

55

Page 57
Image 57
HP 6980 manual If your printer is connected to a network, Option