HP 6980 manual Printer does not print, Verify the following, Check the printer lights

Models: 6980

1 154
Download 154 pages 17.26 Kb
Page 109
Image 109

1.Connect the printer to the network or computer with an Ethernet cable.

2.Open the printer's embedded Web server (EWS).

3.Click the Networking tab, and then click Wireless (802.11) under the Connections heading.

4.Use the Wireless Setup wizard on the Wireless Setup tab to change the printer's settings to match the settings of the network.

5.Close the printer's EWS, then disconnect the Ethernet cable from the printer.

Printer does not print

Verify the following

Verify the following conditions if the printer is not printing:

The printer is connected to the power source.

The cable connections are secure.

The printer is turned on.

The print cartridges are the correct print cartridges for the printer and are properly installed.

The paper or other media is correctly loaded in the In tray.

The printer cover is closed.

The rear access door is attached.

Check the printer lights

The printer lights indicate the printer status and alert you to potential problems. For more information, see Printer lights are on or flashing.

Check the printer cable connection

If your printer and computer are USB-connected and are not communicating with each other, try the following:

Make sure the power cord is firmly connected to the printer and plugged into a power outlet.

Check the USB cable. If you are using an older cable, it might not be working properly. If you experience problems, the USB cable might need to be replaced. Also verify that the cable does not exceed 3 meters (9.8 feet) in length.

Check the connection from your printer to your computer. Verify that the USB cable is securely plugged into the USB port on the back of your printer. Make sure the other end of the USB cable is plugged into a USB port on your computer. After the cable is connected properly, turn your printer off and then on again.

If you are connecting the through a USB hub, make sure the hub is turned on. If the hub is on, try connecting directly to your computer.

Try connecting the USB cable to another USB port on your computer. After you check the connections, try restarting your computer. Turn your printer off and then on again.

User's guide

107

Page 109
Image 109
HP 6980 manual Printer does not print, Verify the following, Check the printer lights, Check the printer cable connection