Use Different Paper/Covers, Size, Units

Size

The Width: and Length: values can be changed by typing numeric strings into the edit boxes.

Any entry that is too large is rounded down to the maximum valid entry, while any entry that is too small is rounded up to the minimum valid entry.

If units are in millimeters, the custom paper-size range minimum is the limit rounded up to the nearest whole millimeter. The custom paper-size range maximum is the limit rounded down to the nearest whole millimeter. Any non-numerical entry reverts to the last valid entry. Width and length entries are validated when the focus changes.

The resolution of each control is 1/100 of a millimeter or 1/100 of an inch, depending on the current measurement units.

Units

To change measurement units, click the button which displays either Use Inches or Use Millimeters.

Custom width and height control limits

The minimum paper size for this product is 98.4 x 148.0 mm (3.87 x 5.83 in) and the maximum is 215.9 x 355.6 mm (8.5 x 14.0 inches). The following table summarizes paper size limits for each paper- handling device.

Table 4-1Host-based driver custom paper sizes

Tray	Dimensions	Minimum	Maximum

Tray 1 (150-sheet	Width	98.4 mm (3.87 inches)	215.9 mm (8.5 inches)
multipurpose)
multipurpose)	Height	148.0 mm (5.83 inches)	355.6 mm (14.0 inches)
	Height	148.0 mm (5.83 inches)	355.6 mm (14.0 inches)

Show important instructions for printing on short media (P1100 base model only)

Select Show important instructions for printing on short media to display a video on using the short media extender tool to load and print on short media. This video plays automatically when a selection is made from the Size is: drop-down list that qualifies as short media.