HP FESSIONAL P1600, FESSIONAL P1560 manual Status lights cycle Status lights cycle during

Table 1-13Control-panel light patterns (continued)

Light status State of the product Action

Status lights cycle	The status lights cycle during the
	formatter initialization period or when the
	product is processing a cleaning page.

No action is required. Wait for the initialization period to end. The product enters the ready state when the initialization period is finished.

Ready light is on, and attention light is The product is in the ready state. off.

No action is required. The product is ready to receive a print job.

Ready light is blinking, and attention light is off.

The product is receiving or processing data.

No action is required. The product is receiving or processing a print job.

Attention light is blinking, and ready light is off.

The product has experienced an error that can be corrected at the product, such as a jam, an open door, the absence of a print cartridge, or the absence of paper in the proper tray.

Inspect the product, determine the error, and then correct the error. If the error is the absence of paper in the proper tray or the product is in a manual feed mode, put the proper paper in the tray and follow the on-screen instructions, or open and close the print-cartridge door to resume printing.

28 Chapter 1 Purpose and scope ENWW