HP FESSIONAL P1560, FESSIONAL P1600 manual State and completes

Table 1-15Control-panel lights (continued)

Light status Light pattern State of the product Action

Attention light is blinking, and all other lights are off.

NOTE: The power button backlight is on.

The product has experienced an error that can be corrected at the product, such as a jam, an open door, or the absence of paper in the proper tray.

Inspect the product, determine the error, and then correct the error. If the error is the absence of paper in the proper tray or the product is in a manual feed mode, put the proper paper in the tray and follow the onscreen instructions, or open and close the print- cartridge door to resume printing.

Attention light		is blinking, ready	The product has	To recover from the
light	is on, and other lights are off.		experienced a	error and print the
			continual error from	available data, press
NOTE: The power button backlight			which it will recover	the go button	.
			on its own.
is on.
				If the recovery is
				successful, the
				product continues to
				the processing data
				state and completes
				the job.

If the recovery is unsuccessful, the product continues to the continuable error state. Try removing any media from the media path and turning the product power off, and then on again.

The attention	, ready	, and go	The product has	1.	Turn off the
lights are on. Toner light		is off.	experienced a fatal		product.
			error from which it
				2.	Wait
NOTE: The power button backlight			cannot recover.
					30 seconds, and
is on.					then turn on the
					product.
				3.	Wait for the
					product to
					initialize.

If the error persists, contact HP customer support.

ENWW Documentation 33