Macintosh installation instructions
On a Macintosh computer, the installation procedures are basically the same for a network administrator, a network client, and a single user. Install the software on any computer that has save rights to the product. Users must have Administrator rights to install the software.
NOTE: If the computer is connected to the product by a LocalTalk (printer port) connection, you must configure the AppleTalk (or network) control panel for the correct connection to communicate with the product. You must set up the HP LaserJet Professional P1100/P1560/P1600 Series Printer , connect it to the computer or network, and turn it on before the software is installed. Macintosh operating systems do not support parallel connections.
The Macintosh partition contains an installer program for each language. Find the appropriate language for the operating system that is being used, and then use the installer program for that language.
NOTE: Detailed installation steps can be found in Mac OS X installation on page 239.
HP LaserJet software CD, Macintosh partition
The files contained in the Macintosh partition of the HP LaserJet software CD are grouped by language and reside in the following directory.
●HP LaserJet Professional P1100/P1560/P1600 Series Printer .pkg (installer for the Mac OS X operating system)
●Documentation
Install the HP LaserJet
Topics:
●General installation instructions
●Mac OS X installation
●Setup instructions
General installation instructions
1.Insert the Macintosh
NOTE: If the CD screen does not open automatically,
2.
3.Follow the onscreen instructions to complete the software installation.
NOTE: If you are installing the
4.When software installation is complete, click Close.
238 Chapter 5 Macintosh software and utilities | ENWW |
