Impulse PCW-5181 user manual Configuring Impulse with Application Developer

Chapter 4 - Configuring Impulse with Application Developer

Mechanics window C will appear if you select Non-IDC Mechanics from the “system” list.

•Enter your Total System Inertia (Load + Mechanics + Motor).

•Select your Move Unit (steps, revs, mm, or inches) from the pulldown menu.

•Enter your Distance Ratio (only if inches or mm are the selected Move Units). You cannot enter Distance Ratio if either steps or revs has been selected.

C

4.Click Next and the Resolution setup window will appear

•Select your Step Resolution from the pulldown menu, or enter a step resolution in incre- ments of 200.

5.Click on Next and the I/O (Input/Output) setup window will appear. Using the pulldown menus, select configurations for up to four (4) Discrete Inputs and one (1) Discrete Output. The buttons to the right of the inputs and outputs are provided for toggling between Active High (A.H.) and Active Low (A.L.).

4-7