Chapter 4 - Configuring Impulse with Application Developer

• Jog High (Jog High Speed) - Default = 2.00 (user-defined units)

Numeric Precision

•Select Standard to limit the decimal precision of accelerations, decelerations, velocities, and distances to the following:

Accels and Decels:

#.x

(One decimal place)

Velocities:

#.xx

(Two decimal places)

Distances:

#.xxx

(Three decimal places)

The Standard decimal precision is sufficient for most applications. Standard is the default setting.

Note: The keypad (FP100 or FP220) only supports Standard decimal precision, therefore project files intended to be used in conjunction with the keypad must be created using the Standard setting. Attempting to load a project file into the keypad without Standard decimal precision will result in an error.

•Select Extended to limit the decimal precision of accelerations, decelerations, velocities and distances to the following:

Accels and Decels:

#.xxx (Three decimal places)

Velocities:

#.xxxxx (Five decimal places)

Distances:

#.xxxxx (Five decimal places)

Project files created with Extended decimal precision may be edited only in Application Developer.

4-14

Page 37 Page 39
Page 38
Image 38
Impulse PCW-5181 user manual Numeric Precision
Page 37 Page 39
Top Page Image Contents