Impulse PCW-5181 user manual Help Using the Help Menu

Chapter 5 - Configuring Impulse with an IDC Keypad

HELP Using the HELP Menu

Versions

•Press the HELP > VERSN (F2) for access to Operating System, Hardware, and Keypad versions (see examples on the right).

•Press F1, F2, or F3 for respective version displays.

•Press the ESC key to exit the HELP menu.

Status

•Press HELP > STATUS for I/O configurations, current drive status, and the operating history of the drive.

•Press I/O to check the configuration of four discrete inputs and one output.

•Press DRIVE for current drive status. The example shows no fault condition.

•Press HISTRY for the following operating histories: num- ber of hours in operation, number of power cycles, and last eight drive faults.

•Press HR_OP for the total number of hours the Impulse has been in operation.

•Press PWR_CY for the number of times power has been cycled.

•Press FAULT to look scroll through the last eight (8) drive faults. Stored Fault #1 is the most recent fault.

−−−−−− HELP −−−−−−

START VERSN STATUS

VERSIONS

OPSYS HDRWAR KPAD

OpSystem Version vXXX

Hardware Version

AMP: E0 I/O F0

Keypad Version vXXX

STATUS

I/O DRIVE HISTRY

In1 In2 In3 In4 Out1

OFF OFF OFF OFF OFF

System is Enabled

FAULT: ✻✻✻✻

OPERATING HISTRY

HR _OP PWR_CY FAULT

Hours Operation

XXX.XX

Num Power Cycles

XXX

↑Stored Fault #1 ↓

Overcurrent (example)

5-9