Lucent Technologies 555-661-150 manual QCC Coverage for Calling Group Overflow

Table 2–14. Scenario 3: Facilities Planning, Calls Originating within the private network and Going to the PSTN, Continued

	System J: Cambridge,	System K: Boston, MA	System L: Washington,	System M: Raleigh, NC
Component	MA (Area Code: 617)	(Area Code: 617)	DC (Area Code: 202)	(Area Code: 919)
Centralized	Not applicable because not	Integrated VMI calling	Integrated VMI calling	Integrated VMI calling
VMS/AA	directly connected to	group extension: 7771	group extension: 7771	group extension: 7771
	System L by tandem	VMI conversion number	Local dial plan members:	VMI conversion number
	trunks.	(non-local dial plan	Extensions for system ports	(non-local dial plan
		member): 6999	used to connect centralized	member): 6999
		UDP routing over route 01,	VMS/AA	UDP routing over route 01,
		tandem PRI trunks,	Message Waiting light	tandem PRI trunks,
		FRL=0, voice, all dialed	updates for non-local	FRL=0, voice, all dialed
		digits are absorbed and	subscribers are sent over	digits are absorbed and
		the digits 7771 are	the tandem PRI signalling	the digits 7771 are
		prepended.	D-channel	prepended.

2 Call-Handling Scenarios Network Configuration Scenarios	MERLIN LEGEND Communications Network Reference 555-661-150
	System

QCC Coverage for Calling Group Overflow

Auto Logout calling group	Listed Directory Number	Not applicable	Not applicable
extension: 7772	(QCC queue): 8800
Non-local dial plan
member: 8800 (Listed
Directory Number — QCC
queue on System K)
UDP routing over route 01,
tandem tie trunks, FRL=0,
voice

Release 6.1

*These are the factory settings. The remote access COR settings are not used for controlling ARS calling on PSTN facilities connected to this system. Such calls are not routed to this system.

†Local considerations may require a lower (more restrictive) FRL

.

Page2-64 Issue 1 August 1998