MERLIN LEGEND Communications System Release 6.1 | Issue 1 |
Network Reference | August 1998 |
6 Troubleshooting |
|
No Message Waiting Light Update | Page |
|
|
■If more trunks are available and need to be assigned, follow the procedure in “Trunks to Pools Assignment” in Chapter 4 of System Programming to assign more tandem trunks. All the tandem trunks in a pool must be of the same type (tie or PRI).
■If not enough trunks are available, consider adding more to your system.
■If there are sufficient trunks assigned but the problem persists, go to Possible Cause 4.
Possible Cause 4: No
What to Do: This can be verified by checking for the 0c03 error on the error log on the hub and on the remote switches. If this error persists on any switches in the private network, contact your local service representative.
