Lucent Technologies 555-661-150 manual Supported System Considerations, Merlin Legend System

MERLIN LEGEND Communications System Release 6.1			Issue 1
Network Reference 555-661-150			August 1998
C Voice/Fax Messaging Systems
	Supported System Considerations		Page C-2
	Supported System Considerations	3

The following are considerations for voice messaging systems used for centralized automated attendant on MERLIN LEGEND Communications System Release 6.0 Version 11 and later systems.

MERLIN LEGEND System 3

For Release 6.1 and later systems, the number of dialed digits for the non-local UDP range for a given pattern must be entered in a new system programming screen (14.515). To access this screen, select 6\V5HQXPEHU.1RQ/RFDO￿8'3.Enter first extension number in range.;.Enter last extension number in range.;.Enter number of dialed digits for the range.;.

Intuity AUDIX 3

■All local and non-local UDP stations must be administered on Intuity

AUDIX.

■Within Intuity AUDIX, the parameter “transfer to subscribers only” must be administered so as to ensure that Intuity AUDIX will deny transfers to all but local and non-local UDP stations.

■When optioned for MERLIN LEGEND systems, Intuity AUDIX can handle 3- or 4-digit dial plans (but not both simultaneously). For example, you cannot have a 3-digit dial plan for one site and a 4-digit dial plan at another site. Note that since a 5-digit dial plan is not supported by Intuity AUDIX when optioned for MERLIN LEGEND systems, one of the work-arounds described in Chapter 5 must be used to route calls to DEFINITY ECS or DEFINITY ProLogix or the DEFINITY must have a 4-digit dial plan.

■The MAP/5P platform supports 500 subscribers, the MAP/40 supports 3000 subscribers, and the MAP/100 supports 6000 subscribers.

■Beginning with Intuity AUDIX R4, enhanced transfer security is available by administering the allowed numbers list. Unless an extension (local and non-local UDP) appears in this list, calls will not be transferred to that number.

MERLIN LEGEND Mail 3

■MERLIN LEGEND Mail should be set up with “Transfer to Subscriber-Only Restrictions.”

■For local UDP extensions, call answer mailboxes (up to 100) should be used.

■For non-local UDP numbers, transfer-only mailboxes should be used. The maximum number of mailboxes of both types is 375.