DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127 Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids

Page8-365test memory

8
test memory

This command performs hardware diagnostic tests on any or all memory circuit

packs in the specified carrier. Both short and the long test are nondestructive

when testing memory.

1. If no alarms are registered a gainst the maintenance objec t then the test sequence is ru n only once. The
long
clear
option forces a clear of all a la rms i f no e rro rs a r e encou nt e red d uri ng t esti ng . Th e
short clear
option only
clears alarms pertinent to tests in the short sequen ce.
2. Refer to the Report Scheduler an d System Printer feature specifica tion for more details.
Action/Object Qualifier Qualifier Description Permissions Defaults Feature
Interactions
test memory location
short
long
repeat
number
clear
schedule
Physical location of the memory
circuit pack: cabinet numbe r
(optional, but always 1 if ent ered)
and carrier letter (either a or b for
duplex, a for simplex)
Option for a brief seri es of
nondestructive diagnostic tests.
Option for a longer, more
comprehensive test seri es (all
nondestructive for this com mand).
Number of times each te st in the
sequence is repeated (1-1 00)
This option causes the test
sequence (short or long) to repea t
until the alarm (if any) is clear ed or
a single test in the sequ ence fails.1
Command is validated and then a
scheduling form displays to
schedule execution of the
command. The command is th en
placed in the command qu eue and
is executed at the specified time.
The information displayed by the
command is sent to the syst em
printer instead of the sc reen.2
Examples:
test memory
test memory a
test memory a schedule
test memory 1a2
test memory b1 sh
test memory b l r 25
test memory a l c
init
inads
craft
nms
See
below none