Lucent Technologies lucent The following example is the output for the test pkt port-network 1 command. The

DEFINITY Enterprise Communications Server Release 6

Maintenance for R6vs/si

555-230-127 Issue 1

August 1997

Maintenance Commands and Trouble-Clearing Aids

Page8-374test pkt

!WARNING:

Since the “clear long” options clear all counters if tests pass, it is possible

for firmware counters to be cleared even when a problem exists. I n some

cases customer service might degrade since calls may be routed over

defective equipment.

Output

The following example is the output for the test pkt port-network 1 command. The

responses display on a test-by-test basis with one line of data for each test result.

1. If no alarms are registe red against the maintenanc e object then the test seq uence is run only once. T he

long clear

option forces a clear of al l alarms if no errors are encountered during testing. The

short clear

option only clears

alarms pertinent to tests in th e short sequence. SEE WARNING B ELOW.

2. Refer to the Report Scheduler an d System Printer feature specifi cation for more details.

Action/Object Qualifier Qualifier Description Permissions Defaults Feature

Interactions

test pkt

port-network pn

number

short

long

repeat

number

clear

schedule

The Packet bus to be tested:

nn

(1-3)

Option for a brief seri es of

nondestructive diagnostic tests.

Option for a longer, more

comprehensive series of bo th

destructive and nondestructive

diagnostic tests.

How many times each test in the

sequence is repeated (1-1 00)

This option causes the tes t sequence

(short or long) to repeat until the alarm

(if any) is cleared or a singl e test in the

sequence fails.1

Command is validated and then a

scheduling form displays to schedule

execution of the command. The

command is then placed in the

command queue and is executed at

the specified time. The i nformation

displayed by the command is sent to

the system printer instea d of the

screen.2

Examples:

test pkt port-network 1 l

test pkt port-network 2 sh r 2

test pkt port-network 2 sh schedule

test pkt port-network 1 l r 25

test pkt port-network 2

test pkt port-network 1 c

init

inads

craft

Test

Sequence

= short;

Repeat =

none