DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123 Issue 1
April 1997
Maintenance Object Repair Procedures

Page10-538DS1-BD (DS1 Interface Circuit Pack)

10
NPE Connection Audit Test (#50):

The system sends a message to the on-board microprocessor to update the

network connectivity translation for all the Network Processing Elements (NPEs)

on the circuit pack.

1. D = Destructive, ND = Non-destructive
CSU Equipment Loopback Test
(#1210) XD
CSU Repeater Loopback Test
(#1211) XD
CPE Loopback Jack Test (#1212) X D
Far CSU Loopback Test (#1213) X D
One-Way Span Test (#1214) X D
Inject Single Bit Error (#1215) X D
End Loopback/Span Test (#1216) X D
Table 10-146. TEST #50 NPE Connect ion Audit Test
Error
Code Test Result Description/ Recommendation
None
2100 ABORT System resources required for this test are not available.
1019 ABORT Test already in progress.
FAIL Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
PASS The circuit pack’s NPEs have been updated with their translation.
Continued on next page
Table 10-145. System Technician-Demanded Tests: DS1-BD — Continued
Order of Investigation Short Test
Sequence Long Test
Sequence
Reset
Board
Sequence
test
ds1-loop
Command D/ND1
Continued on next page