DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123 Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page8-680test trunk
8
If a software fault is encountered while the command is executing, the following
message will be displayed:
Error encountered, can’t complete request
If the trunk group is not administered, the fol lo win g message will be displayed:
Group not assigned, or group assigned but with no member
If the trunk group member is not administered, the following message will be
displayed:
Group member not assigned
If there are no tests found for this maintenance object, the following message will
be displayed:
No tests for this MO
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displaye d:
All maintenance resources busy; try again later
Output
The responses will be displayed on a test-by-test basis with one line of data
displayed for each test result.
Port The port address (cabinet-carrier-slot-circuit) of the maintenance
object that is being tested.
Maintenance Name The type of maintenance object that is being tested.
Alt. Name The alternate means of identifying the maintenance object. Thi s
field contains xxx/yyy when the object is a trunk, where xxx is the
trunk group number and yyy is the member number. It contains
P/xxx when the object is a private CO line, where xxx is the private
CO line group number.