DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123 Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page8-336save announcements
8
When the "resume hardware-group" command is entered to resume a previously
canceled "test hardware-group" command, the state of the test command will be
changed to ’active’ on the "status hardware-group" screen.
save announcements
This command copies announcement data from the announcement board to the
MSS. (tape or Card-Mem)
Synopsis
save announcements

[ spe-active | spe-standby ]

Permissions
The following default logins may execute this command: system technician, cust,
rcust, inads, init.
Examples
save announcements
save announcements spe-active
save announcements spe-standby
Description
The save announcements command copies announcement data from the
announcement board to the MSS. The Card-Mem is the storage device for the
system. By default, announcement data is written to the MSS device in a simplex
processor (SPE) system, or to both MSS devices in a High or Critical Reliability
System. Also, the save announcements command can be directed to write to the
MSS device on either of the processors, in a High or Cri tic al Reliability System.
This command is only allowed if there is an integrated announcement board in
the system. The save announcement command is denied if no announcement
data module has been administered and no NETCON d ata module has been
administered.

Simplex

There are no options for the save announcement in a simplex system. The save
announcement command will save the announcem ent file to the MSS device.