DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123 Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page8-559test cdr-link
8
Feature Intera c tions
The "test card-mem long" command will invoke the Memory Card
Erase/Write/Read Test. This means that the "save translation" and "save
announcement" commands will be rejected while a write-to-memory-card
operation is active.
The "test card-mem long" command will also invoke the Memory Card Capacity
Test which will check if the memory card is more than 98% full or not. This test
will also be invoked after a "save translation" command.
In a High or Critical Reliability System, running "test card-mem" command for a
memory card in the standby SPE means that the standby SPE is put into the
maintenance mode and no SPE interchange is allowed through th e "reset system
interchange" command or scheduled SPE interchange.
test cdr-link
This command will perform a set of tests on a call detail recording (cdr)-link.
Synopsis
test cdr-link [ primary | secondary ]
[ short | long ][ repeat number | clear ]
schedule
Permissions
The following default logins may execute this command: system technician,
inads, init.
Examples
test cdr-link primary l
test cdr-link secondary sh r 2
test cdr-link primary
test cdr-link secondary
test cdr-link secondary c
test cdr-link primary schedule
Description
The test cdr-link command will validate that the call detail recording (cdr)-link has
been administered and exists in the PBX . Each individual test will exercise
diagnostics on the link and then return results of the test along with any possible
error codes.