DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123 Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page8-302release spe-standby
8
If all of the available maintenance resources are currently in use, then the
following message is displayed:
All maintenance resources busy; try again later
Output
For the following output example the command entered was "release sp-link."
Feature Intera c tions
None.
release spe-standby
This command allows the technician to release the standby Switch Processing
Element (SPE).
Synopsis
release spe-st andby
Port The port address (cabinet-carrier-slot-circuit) of the maintenance
object that is being busied out. For this maintenance obje ct,
blanks are displayed.
Maintenance Name The type of maintenance object that is being busied o ut.
Alt. Name The alternate means of identifying the maintenance object. Thi s
field contains the extension when the object is a station, and it
contains xxx/yyy when the object is a trunk, where xxx is the trunk
group number and yyy is the member number. It contains P/xxx
when the object is a private CO line, where xxx is the private CO
line group number.
Result An indicator as to whether the object was successfully busied
out.
Error Code A numerical description of why the command failed.
release sp-link SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
SYS-PRNT PASS
Command Successfully Completed