DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page10-1080PI-SCI (System Communication Interface)
10
Table 10-315. TEST #231 SCI Self Test
Error
Code Test
Result Description/ Recommendation
11 ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
13 ABORT The TN765 PI circuit pack has not been reset yet or is cur rently being reset.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2. If the test continues to abort with error code 13, then r eset t he T N765 v ia
"test interface PCS long ".
!CAUTION:
Resetting the TN765 will cause all BX.25 (Audix, cms, etc.) and ISDN-PRI links to be b riefly torn down.
3. If TN765 fails to be reset, refer to test 176 section description.
4xxx FAIL Hardware on the TN765 Processor Interface failed.
1. 4000 - Assigned data link hardware failure.
2. 4001 - Unassigned data link hardware failure.
3. 4002 - CPU function test failed - hardware failure.
4. 4003 - Local Processor Interface RAM memory test failed - hardware
failure.
5. 4004 - Local EPROM memory test failed - hardware failure.
6. For all of the above errors, retry the test. If it fails again, the
Communication Interface should be restarted. Type in a r eset int er face
command. If the reset is successful, retry the test interface command.
If Test #231 still fails with error codes other than 4001, then replace
TN765 Processor Interface circuit pack. Refer to Chapter 6, ‘‘Reliability
Systems: A Maintenance Aid’’ for instruction s on how to replace an SPE
complex circuit pack. If test fails with Error Code 4001, then an
on-board failure is associated with a non-used port on Processor
Interface circuit pack. TN765 circuit pack should b e rep laced i f thi s port
will be used in the futur e.
PASS TN765 Processor Interface circuit pack passed self-test. On-boar d
hardware is functioning correctly.
Continued on next page