DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123 Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page8-133display memory-configuration
8
Permissions
The following default logins may execute this command: browse, system
technician, cust, inads, init.
Examples
display memory-configuration
display memory-configuratio n long
Description
The maintenance command, display memory-configuration, will indicate the total
memory available for the active, and if present the standby, processor(s). This
command is a single page display with hidden fields for the standby-processor;
these hidden fields will only be visible if a standby processor is available in the
system.
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses help after entering "display
memory-configuration" the followi ng message will be displayed:
Enter [‘long’] [‘print’ or ‘schedule’]
long The “long” command parameter is required to display the stand by SPE
Flash ROM and DRAM configuration.
print If specified, this parameter will cause the information displayed by this
command to be sent to the printer attached to the terminal as well as to
the screen.
schedule When the "schedule" option is specified, the command is validated and
then a scheduling form is displayed to allow the technician to schedule
execution of the command. The command is then p laced in the
command queue and is executed at the specified t ime. The information
displayed by the command is sent to the system p rinter instead of the
screen.