DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123 Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page8-482status mst
8
Parameters
None.
Help Messages
If you press HELP after entering "status mst", the following message displays:
Entry is not required
Error Messages
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displaye d:
All maintenance resources busy; try again later
FORM Output
After entering the command "status ms t ", the us e r w ill be presented with the
following form. The current settings will be placed in the fields.
MST STATUS
Trace Status: enabled
Start Trigger Status: triggered
Stop Trigger Status: not triggered
Pending Stop Count: 5
Enable Trace Time: 1/21/90 10:30
Disable Trace Time : 3/31/90 10:30
Percent of Current Wrap: 100
Wraparound Count: 2
Oldest Message Number: 3345
Newest Message Number: 3923
Completed Snapshots: 0