DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123 Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page8-86copy update-file
8
Description
In a Duplex system only, the copy update-file will copy a field upd ate fil e fro m the
active SPE to the standby SPE. This command is intended to permit the user to
recover from situations whereby the standby SPE was not available when a field
update ("patch") file was downloaded to the switch. All validation checks are
made on the standby as it receives the file. If there is a newer, valid update file on
the standby, the override option must be used to force the copy.
Parameters
Help Messages
If the system technician presses HELP after entering "copy update-file" on a
duplex SPE system the following message is displayed:
[’override’]
Error Messages
If the standby SPE contains a newer patch file than the active SPE and the
override option was NOT used, the following message is displayed:
Active SPE’s update file is older than standby’s
If the vintage of the standby SPE doesn’t match the vintage of the active SPE, the
following message is displayed:
Update file vintage does not match standby SPE core vintage
If there is no update file on active processor, the following message is displayed:
No update file on tape
If the standby SPE is NOT in standby mode, the following message is displayed:
is displayed:
Cannot access the standby SPE at this time
If the active SPE cannot establish a communication path to the standby SP E, the
following message is displayed:
Could not establish netcon data call between SPE’s
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
override The override parameter allows the user to copy the update file
from the active SPE to the standby SPE regardless of the dates.