DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123 Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page8-15busyout journal-printer
8
Parameters
Help Messages
If the system technician presses HELP after entering "busyout journal-printer," the
following object command word choices will be displayed:
pms-log wakeup-log
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displaye d:
All maintenance resources busy; try again later
Error Message
Link not administered not enabled
Output
For the following output example, assume that the command that was entered is
"busyout journal-printer wakeup-log."
pms-log This will busyout the link to the pm s printer. In the output the port nam e
for the pms link is 1.
wakeup-log This will busyout the link to the wakeup logging facility. In the o utput the
port name for this object is 0.
Port The port address (cabinet-carrier-slot-circuit) of the maintenance
object that is being busied out. In this case, the physical object
port address will be a 0 for wakeup log and a 1 for the pms log.
Maintenance Name The type of maintenance object that is being busied o ut.
Alt. Name Not applicable.
Result An indicator as to whether the object was successfully busied
out.
Error Code A numerical description of why the command failed.