DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123 Issue 1
April 1997
Maintenance Architecture
Page1-8Protocols
1
Protocol States
Table 1-1 summarizes the protocols used at various points in the data
transmission stream. See Figure 1-1.
NOTE:
OSI means Open Systems Interconnect
PCM means Pulse Code Modulated
DMI means Digital Multiplexed Interface
Both the physical-layer protocol and the Digital Multiplexed Interface (DMI) mode
used in the connection are dependent upon the type of 8-bit code used at layer 2
between the DTE equipment and DCE equipment, as listed in Table 1-2 and
Table 1-3.
Table 1-1. Protocol States for Data Communication
Transmiss-
ion Type
Incoming
DTE to
DCE OSI
Layer Protocols DTE to
DCE DCE to System
Port Inside System
Analog Modem 1 RS-232, RS-449,
or V.35 analog PCM
2 8- or 10-bit code voice-grade data voi ce-grade data
ADU 1 RS-232 ADU proprietary raw bits
2 asynchronous
8-bit code asynchronous
8-bit code DMI
Digital Data
Module 1 RS-232, RS-449,
or V.35 DCP or BRI raw bits
2 8-bit code DMI DMI
Digital
Signal
Level 1
(DS1)
1 any DS1 PCM or raw bits
2 8-bit code DMI or voice-
grade data DMI or voice- grade
data
Table 1-2. Ph ysical-Layer P rotocol Versus Character Cod e
Protocol Code
RS-232 Asynchronous 8-bit ASCII, and synchronous
RS-449 Asynchronous 8-bit ASCII, and synchronous
V.35 Synchronous