Multi-Tech Systems FF220, FF420, FF820, FF120 manual Setting FaxFinder IP Addresses

Chapter 2: Installation

E. Click the Login button. The Web Management Home screen will appear. From this screen, you can access all of the FaxFinder Server software screens.

3. Setting FaxFinder IP Addresses

A. In the FaxFinder Administration screen, go to the IP Configuration fields.

B. Fill in the IP information that applies to your FF120/220/420/820 FaxFinder Server unit. The fields for “IP Address,” “Subnet Mask,” “Default Gateway” and “Name Server” are required. The Hostname field is used to supply a fully qualified domain name (fqdn) for the FaxFinder Server when it accesses an email server to send email. A “Secondary Name Server” may be considered optional, but, in any case, do not leave any invalid value in this field.

C. Click Update. After the Update button has been clicked, it takes 5 seconds for the FaxFinder to update the addresses.

4. Resetting Admin PC to Its Regular IP Address

In step #1 above, you recorded the original IP address of the administrator’s PC and then reset it to the IP address required to allow communication with the FaxFinder unit. You may now set the IP address of the administrator’s PC back to its original value or to any other value that will allow you to communicate with the FaxFinder at its new IP address.

Multi-Tech Systems, Inc. FaxFinder Admin User Guide 31