Multi-Tech Systems FF220, FF420, FF820, FF120 manual Modem Configuration Table

		Chapter 3: FaxFinder Server Software Screens
“Modem Configuration: POTS Modem” Screen Field Definitions (cont’d)
Field Name	Values	Description
Error Correction	on, off	By setting Error Correction to "on," you are
		requesting that faxes be sent in an error-free
		condition, which can be achieved only if the
		remote fax machine with which you are
		communicating also supports Error Correction
		and has this feature enabled. The Error
		Correction feature slows down fax transmissions.
		If you are operating at speeds below 16,800 bps,
		you can set Error Correction "off" to achieve
		faster transmissions of faxes, although the
		quality of the fax transmissions may be
		compromised. However, if you have set the fax
		baud rate to 16,800 bps or higher, then error
		correction is automatically enabled.
		Default = on.
Smart Dial	on, off	If set to “on,” the POTS modem will detect dial
		tones and busy signals. If ‘no dial tone’
		messages appear consistently, the Smart Dial
		feature may be having difficulty detecting PBX
		dial tone. In such cases, set Smart Dial to “off.”
		Default = on.
Fax Direction	both, inbound,	In this field, you can set the FaxFinder to allow
	outbound,	only incoming faxes, only outgoing faxes, or to
		allow both.

Modem Configuration Table

The Modem Configuration Table will display the settings for each modem as they were set. This is an area that will let you know how each modem is set at a glance.

Columns displayed (in order, from left to right):

•Modem

•Country Code

•Answer On

•Max DTMF Digits

•Routing

•Routing Definition

•Fax ID

•Max Baud Rate

•Error Correction

•Tone Dial

•Smart Dial

•Dial Prefix

•Fax Direction

•Fax Debugging

•Init String

Multi-Tech Systems, Inc. FaxFinder Admin User Guide 59