Multi-Tech Systems FF120, FF420 FaxFinder Send Fax screen, Identification Fax Header Local ID

		Chapter 3: FaxFinder Server Software Screens
“Modem Configuration: POTS Modem” Screen Field Definitions (cont’d)
Field Name	Values	Description
Dial Prefix	Numeric string,	When the FaxFinder is used on a phone line in a
	5 characters, max.	PBX or key system, this is the digit that must be
	Use of a comma is	dialed to access an outside line (that is, a line on
	optional. The comma	the PSTN rather than extensions of the PBX or
	denotes a brief delay to	key telephone system). The digit “9” is most
	establish dial tone for an	frequently used.
	outside line.	If “9” is specified in this field, clients will not need
		to include the “9” in the individual entries in their
		address books or when ‘Adding Recipients’ in the
		FaxFinder Send Fax screen.
		The FaxFinder administrator must inform clients
		as to whether they must include or omit the “9”
		when entering fax numbers.
Fax Debugging	on, off	This field allows you to turn on or off a fax
		debugging feature. When Fax Debugging is on,
		the FaxFinder produces detailed technical
		reports on failed faxes. Generally, this feature is
		for use by the user in conjunction with MultiTech
		tech support personnel. This feature helps to
		identify and clarify unusual or difficult problems
		that may occur.
Init String	in AT command format	In this field, the administrator can enter AT
		commands that the FaxFinder modem will
		implement each time the modem is initialized
		(between each fax call).
Update (button)		Click on this button to implement configuration
		changes on the FaxFinder modem. That is, after
		changing any fields in the Modem
		Configuration screen, you must click the
		Update button for those changes to be activated.
Update All Modems		This button updates changes to all modems of
(button)		the FaxFinder.
Max DTMF Digits	1-15	Indicates the maximum number of dual-tone
		multiple frequency phone-dialing digits that can
		be received by the FaxFinder in this system.
		Default = 4.
Fax ID	alphanumeric;	The value in this field will be printed at the top of
	20 characters, max.	each page of the transmitted fax. The value in
		this field is usually the phone number of the line
		to which the POTS modem is attached.
		However, any alphanumeric string up to 20
		characters is allowed. Sometimes company
		names or abbreviations are included in this
		string. Some governments may require that the
		originating phone number be printed on each fax
		page.
		This field can be linked to the client software.
		The client-user can choose the value of this field
		for his/her Fax ID by going to File Options
		Identification Fax Header Local ID and
		selecting the value “Default (modem Fax ID).”

Multi-Tech Systems, Inc. FaxFinder Admin User Guide 58