Multi-Tech Systems FF820, FF420, FF120, FF220 manual Routing Definition

		Chapter 3: FaxFinder Server Software Screens
	Modem Configuration Screen Field Definitions (cont’d)
Field Name	Values	Description
Routing Definition	Key link,	Many PBXs send a series of DTMF Tones to the Server
	Description link	when a call is being established. The Routing Definition
	-and-	field defines where the Extentsion number is in the series
	Hide Key,	of tones. The Extension number is used by the FaxFinder
	Hide Description
		Server to route the received fax to the appropriate email
		address.
		Routing Definition allows a User Defined setting for PBXs
		using DTMF routing that is not currently in the Routing
		field.
		The Key URL will display the definition of the special
		character sequence that can be used to create a custom
		mode code definition. The definition is used by the
		FaxFinder Server to extract the extension number from
		the DTFM tones sent to the PBX.

The Description URL will display how the FaxServer will interpret the custom definition.

In an example of the Routing set for Avaya Mode Code, the Description in the Routing Definition is displayed as follows:

		In the Description above, the # is used as a delimiter
		between sections of the custom routing definition. There
		are two calling type characters, followed by 4 calling
		number characters, followed by 4 DTMF extension digits.
		The ? tells the Server to use the definition of Max DTMF
		Digits for the number of extension digits. All fields are
		separated by a # tone field separator.
Max Baud Rate	2400 – 33,600 bps	The value in this field determines the maximum baud rate
		used for fax calls on the POTS modem. Set at less than
		33,600 bps only if there are problems with the phone line.
Tone Dial	on, off	Set this field to “on” if your POTS line supports tone
		(DTMF) dialing. Set this field to “off” if the POTS line
		supports rotary dialing only. Default = on.

Multi-Tech Systems, Inc. FaxFinder Admin User Guide 57