Multi-Tech Systems FF420, FF820, FF120, FF220 manual Part B Connecting to Telephony Service

Chapter 2: Installation

Part B: Connecting to Telephony Service

The FaxFinder can either be connected to a PBX

(for use in Automated Routing Mode) or to POTS lines (for use in Manual Routing Mode).

Connection for	Connection for
Automated Routing Mode	Manual Routing Mode
Plug one end of the phone cable into the	Plug one end of the phone cable into the
FaxFinder’s LINE jack and the other into an	FaxFinder’s LINE jack and the other end into
available Station Port on the PBX.	your standard telephone receptacle.
An RJ11-to-RJ11 cable is included with your
FaxFinder.

Automated Routing Mode

1 2 3 4 5 6 7 8

ETHERNET COMMAND

Manual

Routing

Mode

LINE 1 LINE 2 LAN 1 CONSOLE

RESET

Multi-Tech Systems, Inc. FaxFinder Admin User Guide 16