NEC HX4500 manual Safety Notices

Models: HX4500

1 160
Download 160 pages 12.37 Kb
Page 14
Image 14

Safety Notices

!

Caution: To reduce the risk of electric shock which could cause personal injury, follow all safety notices. The symbols shown are used in your documentation and on your equipment to indicate safety hazards.

Warning: Lithium batteries can be dangerous. Improper handling of lithium batteries may result in an explosion. Dispose of lithium batteries as required by local ordinance or as normal waste if no local ordinance exists.

Warning: The detachable power supply cord is intended to serve as the disconnect device.

Warning: This equipment has two 3-wire, grounded power cords. To prevent electrical hazards, do not remove or defeat the ground prong on the power cord. Replace the power cord if it gets

Tdamaged. Contact your dealer for an exact replacement.

Warning: The DC push-button on/off switch on the front panel does not turn off the system AC power. Also, +5vdc is present on the system board whenever the AC power cord is connected between the system and an AC outlet. Before doing the procedures in this manual, make sure that your system is powered off and unplug the AC power cord from the back of the chassis. Failure to disconnect power before opening your system can result in personal injury and equipment damage.

In the U.S.A. and Canada, each power cord must be a UL-listed detachable power cord (in Canada, CSA-certified), type ST or SJT, 16 AWG, 3-conductor, provided with a molded-on NEMA type 5-15 P plug cap at one end and a molded-on cord connector body at the other end. The cord length must not exceed 9 feet (2.7 meters).

x Using This Guide

Page 14
Image 14
NEC HX4500 manual Safety Notices