Remove the top cover or a side panel as follows.
1.Power off the system and ensure the power cords are unplugged from their AC wall outlet.
2.Observe the safety and ESD precautions listed at the beginning of this chapter.
3.The top cover and side panels are secured from the front edge with two thumb lock screws. Loosen the thumb screws (see Figure
Top Cover Screws
Right Panel Screws
Left Panel Screws
Figure 4-2. Mounting Screws for Top Cover and Side Panels
4.Slide the top cover or side panel toward the front of the chassis about an inch until it stops (see Figure
5.Pull the top cover or side panel out and away from the chassis.
6.Set the cover or panel aside for reattaching later.
