![](/images/new-backgrounds/1228756/22875637x1.webp)
System Feature Summary
A summary of the system features is included in Table 1-1.
| Table |
|
|
Feature | Description |
|
|
Modular board set | System is intended for use with a modular board set based on Pentium II |
| Xeon processor technology; from one to four processors and up to 4 GB |
| of memory. |
3
One location for a 3
5
Three locations for 5 1/4- inch removable media devices
12 locations for 3
Rail and back panel slots support up to 11
3
One externally accessible 3
5
Three externally accessible 5
Three hard disk drive cages; each holding up to four 3
Hot | A hot |
backplane | SCSI hard drives. The backplane is designed for Ultra2 wide |
| devices that use the industry standard |
| (SCA) connector. The backplane consists of a row of four drive |
| connectors. |
Power supply | From two to three 420 Watt autoranging power supplies are easily |
| removed/installed for service. In a |
| redundant. |
Software: utilities, setup | BIOS Setup, Resource Configuration Utility, and SCSISelect Utility. The |
| EXPRESSBUILDER |
| |
Security | Mechanical: Key lock at the front door. One intrusion sensor for front door |
| to secure diskette, hard disk, removable media device, power on/off |
| switch, reset switch, top cover, and left/right panel access. Three power |
| |
| chassis. BIOS: Password enable. |
|
|