![](/images/new-backgrounds/1228756/228756103x1.webp)
17.The Steps in configuring your computer screen is displayed. At this screen select “Step 5: Save and exit” and press Enter.
18.The Save and exit screen is displayed. At this screen select “Save the configuration and restart the computer” and press Enter.
19.The Reboot screen is displayed. At this screen press Enter.
20.Now that you have reserved the system resources, you can install the ISA board.
BIOS Setup Utility
The BIOS Setup Utility, like the RCU, is used to change system configuration parameters. This utility has several unique parameters and many parameters that are also configurable with the RCU. The utility is resident in the system FLASH memory and does not require a diskette or an operating system present to run. However, some parameters set with the BIOS Setup Utility that can also be set with the RCU, are overwritten by the RCU the next time the RCU is run.
Using the BIOS Setup Utility
You access the BIOS Setup Utility when you turn on or reboot your system. To run the BIOS Setup Utility, perform the following procedure.
1.Power on or reboot the system. BIOS displays the following:
Press <F2> to enter SETUP
2.Press F2. After BIOS POST completes, the BIOS Setup Utility starts and the Main Menu is displayed. The menu bar at the top of the Main Menu lists the following selections.
Menu | Use |
Main | Use this menu for basic system configuration. |
Advanced | Use this menu for setting the Advanced Features available on your |
| system. |
Security | Use this menu to set User and Supervisor Passwords and the Backup |
| and |
Server | Use this menu for configuring Server Features. |
Exit | Exits the current menu. |
|
|
Use the arrow keys to select a menu or an item on a displayed menu. Press the value keys (listed in the table below) to cycle through the allowable values for the selected field. Use the Exit menu’s “Save Values” selection to save the current values on all the menus.
To display a submenu, position the cursor on a selection that has a submenu and press Enter. Selections with submenus are preceded by an arrow.