NEC HX4500 manual Connecting the Power Cords, Connecting the AC Power Cord Setting Up Your System

Connecting the Power Cords

Plug the female end of each AC power cord into the input receptacles on the rear of the power supplies (see Figure 2-2). Plug the male end of each power cord into NEMA 5-15R outlet for 100-120 Vac or NEMA 6-15R outlet for 200- 240 Vac. If the power cords supplied with the system are not compatible with the AC wall outlet in your region, obtain a suitable power cord that meets the following criteria.

The power cord must be rated for the available AC voltage and have a current rating that is at least 125% of the current rating of the system.

The power cord connector that plugs into the wall outlet must be terminated in a grounding-type male plug designed for use in your region. It must have certification marks showing certification by an agency acceptable in your region.

The power cord connector that plugs into the system must be an IEC-

Ttype CEE-22 female connector.

The power cord must be less than 1.8 meters (6.0 feet) long.

!WARNING

Your system shipped with two AC power cords. Do not attempt to modify or use the supplied AC power cords if it not the exact type required.

Figure 2-2. Connecting the AC Power Cord

2-6 Setting Up Your System