Nortel Networks NN43119-101 manual Reset button, Selecting MAC addresses

IP Softphone 2050 Settings

Reset button

When you select the Reset button in the following procedures, the phone resets immediately without any warning.

However, if you make a change to the settings and select Apply or OK, the phone indicates that a reset needs to take place. A warning message appears—"IP softphone 2050 must reset for the configuration changes to be complete. Select Yes to reset now or select No if you plan on resetting later". You can select Yes to reset now, or No, to defer it until later.

Selecting MAC addresses

To select a MAC address:

1.Click Auto-Create. The Hardware ID text box displays the next address in a range of addresses.

2.Continue clicking Auto-Createto move through the range of available addresses, until you find the one you need.

After you click through all available MAC addresses, Auto-Create generates random hardware ID numbers. Select one of these numbers if your Ethernet hardware address is not unique to the server.

To return the settings to their installation defaults, click Restore Defaults.

To reset the Hardware ID while the IP Softphone 2050 is running, click Reset.

Note: The Firmware Version field displays the latest

IP Softphone 2050 firmware version reported by the server.

89