IP Softphone 2050 Settings
To use the Automatic (DHCP) method:
1.Select the Automatic (DHCP) check box.
2.From the Server list, select your server. You can choose from the Primary, Secondary, or Application (GXAS) servers.
Note 1: Primary and Secondary servers are assigned by DHCP.
Using IP addresses and DNS names
If your communications server does not support DHCP, then you must assign an IP address or DNS name manually.
To assign a manual IP address or DNS name, you must have the following information about your communications server:
•IP address or DNS name
•Port number
•Server type
To assign an IP address or DNS name:
1.From the Server list, select the server you want to configure: Primary, Secondary or Application.
2.Select IP and enter the IP address, or select Name and enter the DNS name.
3.If the server is an Application server, select the Graphical check box. The default port number shows in the Port text box.
4.If your server port number is different from the default number, enter the correct number in the Port text box.
Note: Symposium call center agents must select the Symposium check box.
Restoring defaults
To restore the settings dialog to its default settings, click Restore Defaults.
83
