Configuring CS 1000 Directory user preferences
Use the Call Log telephone option to configure the following preferences:
•“Logging all/unanswered incoming calls” on page 107
•“New call indication” on page 107
•“Preferred name match” on page 108
•“Area code setup” on page 109
•“Name display format” on page 109
Logging all/unanswered incoming calls
You can set the Callers List to log either all incoming calls or unanswered incoming calls only.
To log all calls or only incoming calls:
1.Click 
Services.
A list of options appears in the display area.
2.Use the up and down arrows (on either the navigation cluster or on your PC keyboard) to select Telephone Options > Call Log Options.
3.Select Incoming calls.
4.Select Log Mode.
5.Select either of the following:
—To log all calls, select Log All Calls.
—To log all calls including calls received while the phone was busy, select Log calls if busy
—To log only unanswered calls, select Log unanswered calls.
The default setting for Log Mode is: Log All Calls.
New call indication
With the new call indication option enabled, the IP Softphone 2050 displays an indication message when it receives new incoming calls.
107
