Panasonic CPC-EX manual Digits, Cable punch-out plate, Voice Announce Unit

Chapter 5. Peripheral Equipment Section 300-Installation

Table 5-10. Switch settings for abbreviated dialing digit length, VAU

Switch Block 2 (SW2)

Abbreviated Dialing Digit Length (Switches 7-8)

Switch		Number of Digits
	1 Digit		2 Digits	3 Digits
7	OFF		OFF	ON
8	OFF		ON	OFF

3.Remove the cable punch-out plate (Figure 5-12)to make an opening for the cable coming into the VAU.

To remove the plate, cut the grooves on either side with diagonal shears.

Then bend the plate back and forth with needle-nose pliers to remove it.

Figure 5-12. Cable punch-out plate, Voice Announce Unit

4.Mount the VAU on the wall using the three screws provided with the unit. (See Figure 5-14.)

5.Connect the extension cable from the DBS to CN1 on the VAU.

Note: The two inside pins on CN1 are port 1. The two pins on either side are port 2, as shown in Figure 5-13.

5-24 DBS Manual - Revised April 2000 DBS-2.3/9.2-300