Panasonic CPC-EX manual Printed circuit card installation

Chapter 3. Cabinet Installation Section 300-Installation

Installation

1.With the lettering on the card pointed up, position the card within the slot guides. (See Figure 3-7.)

2.Hold the card on the top and bottom edges with both hands and carefully push the card into the slot.

3.When the connector at the far end of the card touches the corresponding connector on the backplane, press the card in until it is firmly seated.

Figure 3-7. Printed circuit card installation

Slot Label

C onnector

TRK1 TRK2 TRK3 EC1 EC2 EC3 EC4 EC5 EC6 EC7 EC8 EC/TRK SCC CPC AUX1 AUX2

G uide

Card Label

TRK TRK TRK EC* EC	EC EC EC EC EC	EC TRK	SCC CPC
		or	or
		T1	M FR#
		or
		EC

MFR or

API

API or

CBL or

M FR

*The M FR card can be installed in the CPC slotofslave cabinets.

3-8 DBS Manual - Revised April 2000 DBS-2.3/9.2-300