Section | Chapter 5. Peripheral Equipment | ||
|
|
|
|
Table |
|
| |
|
|
|
|
Wiring | Max. distance (in feet) between | Max. distance (in feet) between |
|
gauge | the DBS and SLTA | the SLTA and the SLT |
|
|
|
|
|
AWG 22 | 300’ or 10 W | 3000’ or 100 W |
|
|
|
|
|
AWG 24 | 190’ or 10 W | 1900’ or 100 W |
|
|
|
|
|
AWG 26 | 120’ or 10 W | 1200’ or 100 W |
|
|
|
|
|
4.If the DBS is powered up, turn off the power.
5.Connect the GND and +24V leads on the SLTA to the DBS connector panel. Be sure the wires do not touch each other or touch the metal frame housing.
6.Turn on the DBS power.
7.Connect the “T” and “R” leads to the digital extension ports on the DBS as per Figure
8.Connect the SLT “T” and “R” leads to the SLTs.
9.Install the cover on the SLTA.
DBS Manual - Revised April 2000 |