Section | Chapter 3. Cabinet Installation |
|
|
Wall-Mounting the Cabinet
Guidelines
Caution: Always turn the power switch OFF before beginning installa- tion.
•The DBS is shipped with the cover installed to protect components. Before
•Handle the cabinet carefully to avoid damage.
Installation
1.Remove the eight screws from the front and sides of the cabinet.
2.Take the front cover off by pulling it from the bottom and lifting it up.
3.Take the side covers off by sliding them up, then away.
Figure 3-1. Cover removal
Screw s
Side C over
Front C over
DBS Manual - Revised April 2000 |
